Best Barns Cypress 12'W x 10'D Wood Storage Shed Kit - ALL Pre-Cut

Our Cypress 12x10 wood shed kit from Best Barns will enhance the look of your backyard and provide lots of extra storage! The extra tall 6' 3" walls give enough headroom for most people. Use for storage or even a hobby room or work shop! Need large doors to move riding lawn mowers or motorcycles in and out? The Cypress shed has you covered with extra large doors 6' tall and 5' 4" wide! Doors can be offset right or left like pictured. Our Cypress wood shed has a gabled roof and siding ready to paint the color or your choice! Personalize your new storage shed with windows, shutters, cupola, entrance ramp and a wood floor to give the inside a professional look. (windows, ramp and wood floor pictured are not included)

Everything is Pre-Cut and Ready to Assemble:

• Pre-cut truss system
  
• Pre-cut wall framing
• Pre-cut trim
• Pre-cut siding
• Pre-cut wood gussets
• Pre-cut and pre-built doors
  

Siding Primed:

• Siding included - 3/8" Louisiana Pacific Smart-side Exterior Paneling
• Pre-primed and ready for the paint color of your choice!
  
• 50 year limited warranty!

All required hardware: door hinges, latch, nails and detailed instruction manual included. Paint, shingles and roof edge are provided by owner / not included.

Look at how much room is inside this wood shed! (flooring pictured not included)




Optional Wood Flooring

Floor not included; Add a wood floor kit to your shed to give it a finished look!

Designed specifically for your new storage building. Adding a wood floor provides a dry storage area and raises the building above the ground protecting it from damaging moisture.
-Included in the standard floor kit are 2x4 treated joists (spaced 16" on center), 5/8" OSB (oriented strand board) flooring and nails. The standard flooring is best installed over an existing foundation such as a concrete slab, blacktop lot or gravel. Bricks or patio stones can also be used to level the 2x4 treated floor frame.
-Included in the deluxe floor kit are 4x4 treated runners, 2x4 treated joists (spaced 16" on center), 3/4" Plywood flooring and nails. The extra 4x4 runners add additional support to the floor joists and allows you to build your shed directly on the ground or grass. The 4x4's raise the foundation above the ground for air flow that will eliminate moisture.

The material is not pre-cut and will require the customer to make simple straight cuts. The flooring package will be delivered before your shed by a local lumber dealer. They will call to make delivery arrangements and someone must be there to receive and sign.




*Windows and flooring pictured are not included; Add windows and other accessories below!